STRIP - Alloy 310/310S Stainless Steel
UNS S31008/S31009
W.Nr 1.4845
DESCRIPTION
Type 310 (UNS S31008) is a high-temperature, austenitic chromium-nickel stainless steel with excellent oxidation resistance up to 2000°F (1093°C) in dry air. It offers high creep strength, good mechanical properties, and strong resistance to thermal cycling, outperforming Type 309 in these conditions.
Alloy 310S (UNS S31009) is a low carbon version, with better resistance to sensitization and embrittlement during service.
Applicable Specifications
Strip and Foil:
ASTM A240, ASME SA240, AMS 5521
Applications
Kilns, thermowells, refractory anchor bolts, combustion chambers, retorts, muffles, and food processing equipment.
Nominal Composition
C: 0.25 (0.08) max
Mn: 2.00 max
P: 0.045 max
S: 0.030 max
Si: 1.50 max
Cr: 24.0 – 26.0
Ni: 19.0 – 22.0
Physical Properties
Density:
0.289 lb/in3, (8.0 g/cm3)
Modulus of Elasticity (x 106 psi):
At 68°F (20°C): 29.0 x 103 ksi (200 GPa)
Coefficient of Expansion:
8.8 x 10−6 µin/in°F (32-212°F)
15.9 µm/mK (0-100°C)
Electrical Resistivity:
30.7 µohm.in
0.78 μohm.m
Thermal Conductivity:
8 BTU/ft-hr-°F
14.2 W/m.°C (100°C)
Typical Mechanical Properties – Typical Room Temperature Mechanical Properties
Typical mechanical properties are based on ASTM A240
Annealed
- Tensile Strength (UTS): 75 ksi
- 0.2% YS: 30 ksi
- Elongation% in 2” (50.8 mm): 40
- Hardness Rockwell: 95 HRB
* Tempered Properties available upon request *
For further information Contact:
CONTACT US
Phone: 1.888.843.2350
Elgiloy Specialty Metals – Strip Products
1565 Fleetwood Dr
Elgin, IL 60123 USA
Limitation of Liability and Disclaimer of Warranty:
- The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
- Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, does not recommend or endorse any material for any particular end use or application.
- The data included in this data sheet are typical values and may vary.
- Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.
In no event will Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, be liable for any damages whatsoever arising from the use of the information included in the data sheets.
