STRIP - Alloy 304 Stainless Steel
UNS S30400
EN-DIN 1.4301
DESCRIPTION
304 grade stainless has excellent welding and formability characteristics and is one of the most utilized stainless steels.
Applicable Specifications
AMS 5513, ASTM A313, ASTM A240, ASTM A580, ASTM A 666
Industries Supplied
Process equipment in mining, chemical, cryogenic, food, dairy, and pharmaceutical industries.
Nominal Composition
C: .07 max
Mn: 2.0 max
P: 0.045 max
S: 0.030 max
Si: 0.75 max
Cr: 17.5 – 19.5
Ni: 8.0 – 10.5
N: 0.10 max
Fe: Balance
Physical Properties
Density:
0.29 lb./in3 (8.03 g/cm3)
Modulus of Elasticity (E):
At 70°F (20°C): 28.0 x 103 ksi
193 x 103MPa
Coefficient of Expansion:
9.4 x 10−6 microinches/in.-°F (70-600°F)
16.9 µm/m-°C (20-300°C)
Electrical Resistivity:
28.4 µ ohm.in (72 μ ohm.cm)
Thermal Conductivity:
9.4 Btu-in./ft.2hr.-°F
16.2 W/m-K
Typical Mechanical Properties – Typical Room Temperature Mechanical Properties
Typical mechanical properties are based on ASTM A240
Annealed
- Tensile Strength (UTS): 95 ksi (655 MPa)
- 0.2% YS: 42 ksi (290 MPa)
- Elongation% in 2” (50.8 mm): 55
- Hardness Rockwell: 84 HRBW
* Tempered Properties available upon request *
For further information Contact:
CONTACT US
Phone: 1.888.843.2350
Elgiloy Specialty Metals – Strip Products
1565 Fleetwood Dr
Elgin, IL 60123 USA
Limitation of Liability and Disclaimer of Warranty:
- The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
- Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, does not recommend or endorse any material for any particular end use or application.
- The data included in this data sheet are typical values and may vary.
- Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.
In no event will Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, be liable for any damages whatsoever arising from the use of the information included in the data sheets.
