DESCRIPTION
Titanium Grade 21s is a metastable beta titanium alloy that offers substantial strength to weight ratios. It offers the high strength of metastable beta titanium alloys along with improved oxidation resistance, elevated temperature strength, and creep resistance. TI21s is a good choice for metal matrix compositions because it can be rolled to a foil, is compatible with most fibers, and is thermally stable to 816°C. Grade 21s is known to be extremely resistant aircraft hydraulic fluid, making it perfect for the aerospace industry.
Applicable Specifications
Strip and Foil:
ASTM B 265
Applications
Aircraft Engine Components and Ductwork
Industries Supplied
Aerospace.
Nominal Composition
C: 0.05 max
O: 0.11 – 0.17
N: 0.050 max
H: 0.02 max
Mo: 14.0 – 16.0
Nb: 2.4 – 3.2
Al: 2.5 – 3.5
Si: 0.15 – 0.25
Fe: 0.400 max
Ti: Balance
Res. Each: 0.10 max
Res. Total: 0.40 max
Physical Properties
Density:
0.178 lb/in3, (4.93 g/cm3)
Modulus of Elasticity (E):
At 70°F (20°C): 15.2 x 103 ksi (105 GPa)
Modulus of Rigidity (G)
At 70°F (20°C): 5.7 x 103 ksi (39.5 GPa)
Coefficient of Expansion:
3.93 µin/in.-°F (70°F to 1000°F)
7.07 µm/m-°C (20°C to 538°C)
Electrical Resistivity:
53 µΩ.in, (1.35 µΩ.cm)
Thermal Conductivity:
4.4 Btu-in./ft.hr.-°F, (4.93 W/m-K)
Typical Mechanical Properties
Annealed
- Heat Treatment: Proprietary Continuous Furnace Anneal
- Tensile Strength: 115-140 ksi (793-965 MPa)
- Suggested Operating Conditions: 0-°F to 1100°F (-18°C to 538°C)
Annealed and Aged
- Heat Treatment: 1000°F (538°C) for 8 hours
- Tensile Strength: 170 ksi min (1172 MPa min)
- Suggested Operating Conditions: 0-°F to 1100°F (-18°C to 538°C)
For further information Contact:
CONTACT US
Phone: 1.888.843.2350
Elgiloy Specialty Metals – Strip Products
1565 Fleetwood Dr
Elgin, IL 60123 USA
Limitation of Liability and Disclaimer of Warranty:
- The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
- Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, does not recommend or endorse any material for any particular end use or application.
- The data included in this data sheet are typical values and may vary.
- Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.
In no event will Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, be liable for any damages whatsoever arising from the use of the information included in the data sheets.
