DESCRIPTION
Hastelloy® alloy C-4 is a nickel-chromium-molybdenum alloy with good oxidation resistance and stress-corrosion cracking resistance at high temperatures. Hastelloy® alloy C-4 also has high resistance to many chemical process environments and is particularly resistant to hydrochloric acid, sulfuric acid, and chlorides.
Applicable Specifications
Wire & Bar:
ASTM B574, NACE MR0175 (ISO 15156-3).
Applications
Springs and components operating in oxidizing and non-oxidizing acids.
Industries Supplied
Chemical Processing
Nominal Composition
Cr: 14.0 – 18.0
Mo: 14.0 – 17.0
Fe: 3.0 max
Co: 2.0 max
Mn: 1.0 max
Ni: balance
C: 0.015 max
Ti: 0.7 max
Si: 0.08 max
P: 0.04 max
S: 0.03 max
Physical Properties
Density:
0.312 lb/in3, (8.64 g/cm3)
Modulus of Elasticity (E):
At 70°F (20°C): 30.8 x 103 ksi (211 GPa)
Modulus of Rigidity (G):
At 70°F (20°C): 11.8 x 103 ksi (81.0 GPa)
Coefficient of Expansion:
7.0 µin/in.-°F (70°F to 600°F)
12.6 µm/m-°C (20°C to 300°C)
Electrical Resistivity:
49.1 µΩ.in, (125 µΩ.cm)
Thermal Conductivity:
70 Btu-in/ft2hr-°F, (10.1 W/m-K)
Typical Mechanical Properties – Spring Applications
Annealed
- Heat Treatment: 1950°F (1066°C)
- Tensile Strength: 110 – 150 ksi; (758-1034 MPa)
- Suggested Operating Conditions: -330°F to 750°F (-200°C to 400°C)
Spring Temper
- Tensile Strength: 190 – 220 ksi; (1310 – 1517 MPa)
- Suggested Operating Conditions: -330°F to 750°F (-200°C to 400°C)
Hastelloy® is a registered trademark of Haynes International, Inc..
For further information Contact:
CONTACT US
Phone: 1.847.695.1900
Elgiloy Specialty Metals – Wire Products
356 N.Cross Street
Sycamore, IL 60178 USA
Limitation of Liability and Disclaimer of Warranty:
- The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
- Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, does not recommend or endorse any material for any particular end use or application.
- The data included in this data sheet are typical values and may vary.
- Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.
In no event will Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, be liable for any damages whatsoever arising from the use of the information included in the data sheets.
