- Elgiloy Specialty Metals - https://www.elgiloy.com -

Wire – Incoloy Alloy A-286

Incoloy® Alloy A-286

UNS S66286
W.Nr 1.4980

Applications

Fasteners and springs.

Description

Incoloy® alloy A-286 is an age-hardenable Iron-Nickel-Chromium alloy with high strength and corrosion resistance at elevated temperatures.  Incoloy® A-286 can operate from cryogenic temperatures up to 750°F.

Industries Supplied

Automotive and Aerospace.

Nominal Composition

Ni: 24.0 – 27.0
Cr: 13.5 – 16.0
Ti: 1.9 – 2.35
Mo: 1.0  – 1.5
Mn: 2.0 max
Si: 1.0 max
Fe: balance
Al: 0.35 max
V: 0.1 – 0.5
C: 0.08 max
S: 0.030 max

Physical Properties

Density: 0.287 lb/in3, (7.94 g/cm3)

Modulus of Elasticity (E):
At 70°F (20°C): 28.8 x 103 ksi (199 GPa)

Modulus of Rigidity (G):
At 70°F (20°C): 11.2 x 103 ksi (77.0 GPa)

Coefficient of Expansion:
9.47 µin/in.-°F (70°F to 600°F)
17.0 µm/m-°C (20°C to 300°C)

Electrical Resistivity: 35.8 µΩ.in, (91 µΩ.cm)

Thermal Conductivity: 88 Btu-in/ft2hr-°F, (12.7 W/m-K)

Applicable Specifications

Wire & Bar: AMS 5726, AMS 5731, AMS 5732, AMS 5734, AMS 5737, AMS 5804, AMS 5805, AMS 5810, AMS 5853, ASTM A638, NACE MR0175 (ISO 15156-3).

Typical Mechanical Properties – Spring Applications

  • Annealed
    • Heat Treatment: 1800°F (980°C)
    • Tensile Strength: 80 – 110 ksi; (550-760 MPa)
    • Suggested Operating Conditions: -300°F to 750°F (-184°C to 400°C)
  • Annealed + Aged
    • Heat Treatment:  After spring coiling.  Age: 1300 – 1400°F (704°C to 760°C) for 16 hours.
    • Tensile Strength: 160 – 190 ksi; (1100 – 1300 MPa)
    • Suggested Operating Conditions: -300°F to 750°F (-184°C to 400°C)
  • Spring Temper
    • Tensile Strength: 160 – 190 ksi; (1100 – 1310 MPa)
    • Suggested Operating Conditions: -300°F to 750°F (-184°C to 400°C​)
  • Spring Temper + Aged
    • Heat Treatment: After spring coiling. Age: 1300 – 1400°F (704°C to 760°C) for 8 hours
    • Tensile Strength: 200 – 240 ksi; (1379 – 1655 MPa)
    • Suggested Operating Conditions: -300°F to 750°F (-184°C to 400°C​)

Incoloy® is a registered trade mark of the Special Metals Corporation group of companies.

For further information Contact:

Contact Us
Phone: 1 847 695 1900
Elgiloy Specialty Metals – Wire Products
356 N.Cross Street
Sycamore, IL 60178 USA

Limitation of Liability and Disclaimer of Warranty:

  • The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only.  It is not intended for engineering or design.
  • Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., does not recommend or endorse any material for any particular end use or application.
  • The data included in this data sheet are typical values and may vary.
  • Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.

In no event will Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., be liable for any damages whatsoever arising from the use of the information included in the data sheets.