- Elgiloy Specialty Metals - https://www.elgiloy.com -

Strip – ICONEL Alloy 600

INCONEL® Alloy 600

ASTM B168, AMS 5540, UNS N06600
W.Nr 2.4816

Applications

Reactor vessels, furnace seals fans and fixtures and process equipment.

Description

INCONEL® Alloy 600 is a Nickel-Chromium-Iron alloy with good corrosion resistance, oxidation resistance, and high strength at high temperatures. INCONEL® Alloy 600 is highly resistant to chloride-ion stress-corrosion cracking due to the high nickel content. Age-hardening treatments are not required, as INCONEL® Alloy 600 is hardened and strengthened through cold work only. INCONEL® Alloy 600 can operate from cryogenic temperatures to 700°F.

Industries Supplied

Chemical Processing, Heat Treating, Nuclear, and Aerospace.

Nominal Composition

C: 0.15 max
Mn: 1.00 max
Si: 0.50 max
P: 0.040 max
S: 0.015 max
Cr: 14.0 – 17.0
Ni: 72.0 min
Fe: 6.0 – 10.0
Co: 1.0 max
Nb: 1.0 max
Ti: 0.50 max
Al: 0.35 max
Cu: 0.50 max

Physical Properties

Density: 0.306 lb/in3, (8.47 g/cm3)

Modulus of Elasticity (E):
At 70°F (20°C): 31.1 x 103 ksi (214 GPa)

Modulus of Rigidity (G)
At 70°F (20°C):  11.7 x 103 ksi (81.0 GPa)

Coefficient of Expansion:
7.9 µin/in.-°F (70°F to 600°F)
14.2 µm/m-°C (20°C to 538°C)

Electrical Resistivity: 40.6 µΩ.in, (103 µΩ.cm)

Thermal Conductivity: 103 Btu-in/ft2hr-°F, (14.9 W/m-K)

Applicable Specifications

Strip and Foil: ASTM B168, AMS 5540

Typical Mechanical Properties

  • Annealed
    • Heat Treatment: 1975°F (1079°C)
    • Tensile Strength: 80 – 110 ksi (552 – 758 MPa)
    • Suggested Operating Conditions: -300°F to 700°F (-184°C to 370°C)
  • Spring Temper
    • Tensile Strength: 125 – 185 ksi (862 – 1275 MPa)
    • Suggested Operating Conditions: -300°F to 700°F (-184°C to 370°C)

INCONEL® is a registered trademark of the Special Metals Corporation group of companies.

For further information Contact:

Contact Us
Phone: 1 888 843 2350
Elgiloy Specialty Metals – Strip Products
1565 Fleetwood Dr.
Elgin, IL 60123 USA

Limitation of Liability and Disclaimer of Warranty:

  • The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only.  It is not intended for engineering or design.
  • Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., does not recommend or endorse any material for any particular end use or application.
  • The data included in this data sheet are typical values and may vary.
  • Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.

In no event will Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., be liable for any damages whatsoever arising from the use of the information included in the data sheets.


INCONEL® Alloy 600

INCONEL® Alloy 600 is a crafted metallic material that offers superior heat, oxidation, and also deterioration resistance. The service temperature of this alloy can go down to the lowest cryogenic limits, with the top end maxing out at around 2000 degrees Fahrenheit. INCONEL® Alloy 600 offers outstanding resistance to organic as well as inorganic substances, chloride ion stress corrosion cracking, and also oxidizing conditions and reducing. Furthermore, the chromium material in INCONEL® Alloy 600 provides resistance to sulfur substances. INCONEL® Alloy 600 specialty steel is also non-magnetic in nature. It has great mechanical properties at both high and low temperature levels. Nickel based super alloys are the very best products in the market for industrial applications that require not only heat strength, but also exceptional deterioration resistance. They have great workability and are excellent for chemical processing units due to their high level of resistance to a number of different chemicals.

INCONEL® Alloy 600 strip is a nickel-chromium alloy used for applications that need both corrosion and resistance to the highest of temperatures. The high nickel material in INCONEL® Alloy 600 is what enables it to retain considerable resistance under reducing conditions. It also makes it resistant to deterioration by a variety of both organic and non-organic compounds, provides it outstanding resistance to chloride-ion stress-corrosion splitting and finally, supplies exceptional resistance to alkaline solutions.

There are several different industries that utilize INCONEL® Alloy 600. Some of the most popular industries include aerospace, chemical, food processing, nuclear engineering, heat treating, components for gas turbines, and even paper. This alloy can be utilized in processes that involve both extreme heat, and extreme cold. When you compare this alloy to other metals, it can handle colder temperatures than mild steel, not as much as 304 stainless steel, but is more amiable to machine work.

INCONEL® Alloy 600 strip is best utilized in severe environments. It performs well in gas turbine blades, seals, and combustors, in addition to turbocharger blades and seals, electric completely submersible well pumps, electric motor shafts, high temperature bolts, chemical processing, pressure vessels, warmth exchanger tubes, vapor generators and core parts in nuclear pressurized water activators.  Similarly, you will often find it in the exhaust systems of race cars in all different levels of the sport, and also the turbo systems of high performance vehicles that are offered commercially. It is increasingly used in the central heating boilers of waste burners.

Elgiloy Specialty Metals is one of the market leaders in creating the highest quality light gauge strip. No matter what your needs are, our full service facility will do everything that they can to satisfy them. We only work with the highest quality materials from INCONEL®, HASTELLOY®, and stainless steel and cobalt alloys, each one that can be customized to your exact specifications. Our light gauge strip is scrutinized under the toughest quality approvals, and pass with flying colors. Our processes ensure that our light gauge strip is cost effective and produced quickly. If you need strip that can handle the most extreme situations, contact Elgiloy and let us help you get the job done right.