- Elgiloy Specialty Metals - https://www.elgiloy.com -

Strip – HAYNES®188 alloy

Posted By Alice Stengel On In | Comments Disabled
Printable PDF QUOTE

HAYNES®188 alloy

UNS R30188
W.Nr 2.4683

Applications

Combustor liners and cans, furnace liners, flame hoods, gas turbine rotors, and nozzle diaphragm valves.

Description

HAYNES® 188 alloy is a cobalt-nickel-chromium-tungsten alloy with excellent high temperature tensile strength, sulfidation, and oxidation resistance up to 1095°C (2000°F) for long term exposures. HAYNES® 188 alloy is not age hardenable, but may be cold worked to achieve higher tensile and yield strength. HAYNES® 188 alloy responds well to conventional forming and welding techniques.

Industries Supplied

Military and Commercial Aerospace, Chemical Processing, Land-Based Gas Turbines, and Nuclear markets.

Nominal Composition

C: 0.05 – 0.15
Mn: 1.25 max
P: 0.02 max
S: 0.015 max
Si: 0.20 – 0.50
Cr: 21.0 – 23.0
Ni: 20.0 – 24.0
Co: balance
B: 0.015 max
Fe: 3.0 max
W: 13.0 – 15.0
La: 0.03 – 0.15

Physical Properties

Density: 0.3251 lb/in3, (9 g/cm3)

Modulus of Elasticity (E):
At 70°F (20°C): 34 x 103 ksi (232 GPa)

Modulus of Rigidity (G)
At 70°F (20°C): 14 x 103 ksi (93 GPa)

Coefficient of Expansion:
6.6 µin/in.-°F (70°F to 1000°F)
12 µm/m-°C (20°C to 538°C)

Electrical Resistivity: 0.0394 µΩ.in, (0.1 µΩ.cm)

Thermal Conductivity: 73 Btu-in/ft2hr-°F, (10 W/m-K)

Applicable Specifications

Strip and Foil: AMS 5608, GE B50A712, PWA 1042, Rolls Royce MSRR 7165

Typical Mechanical Properties

  • Annealed
    • Heat Treatment: Per AMS 5608
    • Tensile Strength: 130-160 ksi (900-1100 MPa)
    • Suggested Operating Conditions: -300°F to 2000°F (-185°C to 1095°C)
  • Spring Temper
    • Heat Treatment: None
    • Tensile Strength: Up to 250 ksi (1725 MPa)
    • Suggested Operating Conditions: -300°F to 2000°F (-185°C to 1095°C)

HAYNES® is a registered trademark of Haynes International, Inc.

For further information Contact:

Contact Us
Phone: 1 888 843 2350
Elgiloy Specialty Metals – Strip Products
1565 Fleetwood Dr.
Elgin, IL 60123 USA

Limitation of Liability and Disclaimer of Warranty:

  • The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only.  It is not intended for engineering or design.
  • Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., does not recommend or endorse any material for any particular end use or application.
  • The data included in this data sheet are typical values and may vary.
  • Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.

In no event will Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., be liable for any damages whatsoever arising from the use of the information included in the data sheets.