Elgiloy Specialty Metals Inconel 601 Wire | Nickel 601 Wire | ASTM B166

Inconel® alloy 601

UNS N06601
W.Nr 2.4851

Applications

Furnace fixtures and mesh belts.

Description

Inconel^® 601 alloy wire is a Nickel-Chromium-Iron corrosion and heat-resistant alloy. The aluminum content gives this alloy excellent resistance to high-temperature oxidation. Inconel^® 601 is not age-hardenable and is only strengthened by cold working.
Inconel^® 601 can operate from cryogenic temperatures up to 645°F (340°C).

Industries Supplied

We supply Inconel 601 to the Thermal Processing, Chemical Processing, Power Generation and Aerospace industries.

Nominal Composition

Ni: 58.0 – 63.0
Cr: 21.0 – 25.0
Al: 1.0 – 1.7
Cu: 1.0 max
Mn: 1.0 max
Fe: balance
Si: 0.5 max
C: 0.1 max
S: 0.015 max

Physical Properties

Density: 0.293 lb/in³, (8.11 g/cm³)

Modulus of Elasticity (E):
At 70°F (20°C): 30.0 x 103 ksi (207 GPa)

Modulus of Rigidity (G):
At 70°F (20°C): 11.8 x 10³ ksi (81.2 GPa)

Coefficient of Expansion:
8.1 µin/in.-°F (70°F to 600°F)
14.6 µm/m-°C (20°C to 300°C)

Electrical Resistivity: 46.5 µΩ.in, (118 µΩ.cm)

Thermal Conductivity: 78 Btu-in/ft²hr-°F, (11.2 W/m-K)

Applicable Specifications

Wire & Bar: ASTM B166, AWS A5.14.

Typical Mechanical Properties – Spring Applications

Annealed
- Heat Treatment: 2100°F (1150°C)
- Tensile Strength: 90 – 115 ksi; (620-793 MPa)
- Suggested Operating Conditions: -300°F to 645°F (-184°C to 340°C)
Spring Temper
- Tensile Strength: 180 – 210 ksi; (1240 – 1448 MPa)
- Suggested Operating Conditions: -300°F to 645°F (-184°C to 340°C)

Inconel^® is a registered trademark of the Special Metals Corporation group of companies.

For further information Contact:

Contact Us
Phone: 1 847 695 1900
Elgiloy Specialty Metals – Wire Products
356 N.Cross Street
Sycamore, IL 60178 USA

Limitation of Liability and Disclaimer of Warranty:

The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., does not recommend or endorse any material for any particular end use or application.
The data included in this data sheet are typical values and may vary.
Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.

In no event will Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., be liable for any damages whatsoever arising from the use of the information included in the data sheets.