- Elgiloy Specialty Metals - https://www.elgiloy.com -

Strip – Titanium Beta 21S

Titanium Grade 21s

UNS R58210

Applications

Aircraft Engine Components and Ductwork

Description

Titanium Grade 21s is a metastable beta titanium alloy that offers substantial strength to weight ratios. It offers the high strength of metastable beta titanium alloys along with improved oxidation resistance, elevated temperature strength, and creep resistance. TI21s is a good choice for metal matrix compositions because it can be rolled to a foil, is compatible with most fibers, and is thermally stable to 816°C. Grade 21s is known to be extremely resistant aircraft hydraulic fluid, making it perfect for the aerospace industry.

Industries Supplied

Aerospace.

Nominal Composition

C: 0.05 max
O: 0.11 – 0.17
N: 0.050 max
H: 0.02 max
Mo: 14.0 – 16.0
Nb: 2.4 – 3.2
Al: 2.5 – 3.5
Si: 0.15 – 0.25
Fe: 0.400 max
Ti: Balance
Res. Each: 0.10 max
Res. Total: 0.40 max

Physical Properties

Density: 0.178 lb/in3, (4.93 g/cm3)

Modulus of Elasticity (E):
At 70°F (20°C): 15.2 x 103 ksi (105 GPa)

Modulus of Rigidity (G)
At 70°F (20°C):  5.7 x 103 ksi (39.5 GPa)

Coefficient of Expansion:
3.93 µin/in.-°F (70°F to 1000°F)
7.07 µm/m-°C (20°C to 538°C)

Electrical Resistivity: 53 µΩ.in, (1.35 µΩ.cm)

Thermal Conductivity: 4.4 Btu-in./ft.hr.-°F, (4.93 W/m-K)

Applicable Specifications

Strip and Foil: ASTM B 265

Typical Mechanical Properties

  • Annealed
    • Heat Treatment: Proprietary Continuous Furnace Anneal
    • Tensile Strength: 115-140 ksi (793-965 MPa)
    • Suggested Operating Conditions: 0-°F to 1100°F (-18°C to 538°C)
  • Annealed and Aged
  • Heat Treatment: 1000°F (538°C) for 8 hours
  • Tensile Strength: 170 ksi min (1172 MPa min)
  • Suggested Operating Conditions: 0-°F to 1100°F (-18°C to 538°C)

  • For further information Contact:

    Contact Us
    Phone: 1 888 843 2350
    Elgiloy Specialty Metals – Strip Products
    1565 Fleetwood Dr.
    Elgin, IL 60123 USA

    Limitation of Liability and Disclaimer of Warranty:

    • The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only.  It is not intended for engineering or design.
    • Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., does not recommend or endorse any material for any particular end use or application.
    • The data included in this data sheet are typical values and may vary.
    • Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.

    In no event will Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., be liable for any damages whatsoever arising from the use of the information included in the data sheets.