- Elgiloy Specialty Metals - https://www.elgiloy.com -

Strip – HAYNES® 282® alloy

HAYNES® 282® alloy

UNS N07208

Applications

Air and land-based turbines, airplane exhaust nozzles as well as high temperature automotive gaskets and seals.

Description

HAYNES® 282® alloy is an age-hardenable nickel-based superalloy that combines excellent creep strength with thermal stability, weldability, and fabricability. The new alloy has excellent creep strength in the temperature range of 1200 to 1700°F (649to 927°C), surpassing that of Waspaloy alloy, and approaching that of R-41 alloy HAYNES® 282® alloy can be further aged from the annealed condition or cold reduced condition for modest gains in physical properties.

Nominal Composition

C: 0.04 – 0.08
Mn: 0.30 max
Si: 0.15 max
P: 0.015 max
S: 0.015 max
Cr: 18.5 – 20.5
Co: 9.0 – 11.0
Mo: 8.0 – 9.0
Ti: 1.90 – 2.30
Al: 1.38 – 1.65
B: 0.003 – 0.010
Fe: 1.5 max
Cu: 0.1 max
Zr: 0.020
Ni: remainder

Physical Properties

Density: 0.296 lb/in3, (8.3 g/cm3)

Modulus of Elasticity (E):
At 70°F (20°C): 31.0 x 103 ksi (216 GPa)

Modulus of Rigidity (G)
At 70°F (20°C):  11.9 x 103 ksi (82 GPa)

Coefficient of Expansion:
6.7 µin/in.-°F (70-1000°F)
12.1 µm/m-°C (20-538°C)

Electrical Resistivity: 49.7 µohm-in, (126.1 µohm-cm)

Thermal Conductivity:
72 Btu-in/ft2hr-°F
10.3 W/m-°C

Applicable Specifications

Strip and Foil: AMS 5951, PS-6101-5

Typical Mechanical Properties

  • Annealed
    • Heat Treatment: Per AMS specification
    • Tensile Strength: 110 – 130 ksi (MPa)
    • Suggested Operating Conditions: -300°F to 1700°F (-184°C to 927°C)
  • Spring Temper
    • Heat Treatment: None
    • Tensile Strength: Up to 210 ksi (MPa)
    • Suggested Operating Conditions: -300°F to 1700°F (-184°C to 927°C)
  • Aged
    • Heat Treatment: Per AMS specification
    • Tensile Strength: 160 – 210 ksi (MPa)
    • Suggested Operating Conditions: -300°F to 1700°F (-184°C to 927°C)

Haynes® is a registered trademark of Haynes International, Inc.

For further information Contact:

Contact Us
Phone: 1 888 843 2350
Elgiloy Specialty Metals – Strip Products
1565 Fleetwood Dr.
Elgin, IL 60123 USA

Limitation of Liability and Disclaimer of Warranty:

  • The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only.  It is not intended for engineering or design.
  • Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., does not recommend or endorse any material for any particular end use or application.
  • The data included in this data sheet are typical values and may vary.
  • Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.

In no event will Elgiloy Specialty Metals, a Division of Combined Metals of Chicago L.L.C., be liable for any damages whatsoever arising from the use of the information included in the data sheets.