PRODUCT DETAILS

Hastelloy®X alloy

UNS N60002
W. Nr 2.4665

HASTELLOY®

X alloy is a nickel-chromium-iron-molybdenum alloy that possesses an exceptional combination of oxidation resistance, fabricability and high-temperature strength. . X alloy exhibits good ductility after prolonged exposure to high temperatures.
Applications include: combustion chambers, gas turbine engine components such as honeycomb seals, compressor vanes and combustor cases.

Industries Supplied

Aerospace, industrial furnaces, petrochemical, and chemical processing.

NOMINAL COMPOSITION (min & max)

  C Mn Si P S Cr Co Mo W Fe Al Ti Ni
MIN 0.05 - - - - 20.50 0.50 8.00 0.20 17.00 - - -
MAX 0.15 1.00 1.00 0.040 0.030 23.00 2.50 10.00 1.00 20.00 0.50 0.15 balance

APPLICABLE SPECIFICATIONS

Strip

AMS 5536

PHYSICAL PROPERTIES

  At 70°F At 20°C
Density 0.297 lb/in3 8.22 g/cm3
Modulus of Elasticity (E) 29.8 X 103 ksi 205 GPa
Modulus of Rigidity (G) 11.3 X 10ksi 77.6 GPa
Coefficient of Expansion 8.1 microinches/in-°F (70-1000°F) 14.5 * µm/m-°C (20-538°C)

Electrical Resistivity

46.6 µ ohm.in  118.36 µ ohm.cm

Thermal Conductivity

63 Btu-in./ft.2hr.-°F 9.1 W/m-k

TYPICAL MECHANICAL PROPERTIES (Spring Applications)

Condition Heat Treatment Tensile Strength Suggested Operating Conditions
Annealed

2125°F (1163°C)

105 ksi ( MPa) min

-300°F to 2200°F (-184°C to 1205°C)

Hastelloy® is a registered trademark of Haynes International, Inc.

For further information Contact:

Email: stripinfo@elgiloy.com

Phone: 1.888.843.2350 

Elgiloy Specialty Metals - Strip Products

1565 Fleetwood Dr. 

Elgin, IL 60123 USA